About us

Maran e Peracini cast iron valves production site in Italy

Founded in 1963, Maran e Peracini has over 50 years of know-how and experience in the manufacturing of cast iron gate valves, check valves, foot valves and strainers.

This has allowed us a constant growth and extension of our product range, which is distributed and valued on an international level.

Together with our customers we aim at building up long-lasting business relationships based on reliability and trust.

Cast iron valves production

Our plant is based in Borgosesia, Piedmont (Italy), and our departments consist of a 5,000 m2 covered surface and another 4,000 m2 uncovered surface.

Our ambition has always been to provide our customers with “Made in Italy” long-lasting products of certified high quality.

For this reason we produce exclusively in Italy and perform rigorous checks on processes and component suppliers, which are all European ISO 9001 certified companies.

We use cast iron and ductile iron castings to produce gate valves, check valves, foot valves and strainers, ranging from DN40 to DN300 and suitable for operating pressures PN 10 and PN 16, in compliance with ISO/EN/ANSI/BS standards.

We are ISO 9001:2015 certified for the design and manufacture of our products, which have the PED Certificate of conformity.

Certifications

Maran-e-Peracini-ISO-9001
Maran-e-Peracini-Politica-Qualità
Maran-e-Peracini-ICIM-PED

Maran e Peracini has a certified Quality Control System in accordance with ISO 9001:2015 standards with regards to the design and manufacture of cast iron gate valves, check valves, strainers and foot valves.

Corporate Policy

Maran e Peracini has set itself their customers’ satisfaction, combined with the promotion of an effective safety policy, as a strategic goal.

This goal is to be pursued through the continual improvement of processes, products and the workers’ health and safety conditions in the workplace, as well as through the adoption of an integrated management system in compliance with the requirements of UNI EN ISO 9001, UNI 45000, UNI EN ISO 14001 and the European Directive 2014/68/EU.

Therefore, the management ensures its commitment to:

Adopt simple and efficient procedures which allow the periodic analysis of reported non-compliances and therefore the adoption of measures to prevent their recurrence.
Comply with all the legal requirements and other requirements applicable to processes, products and concerning risks for the health and safety in the workplace, for preventing injury or sickness.
Demonstrate a good level of environmental performance, keeping the significant environmental impacts of its activities, products and services under control, within the framework of a structured management system
Encourage the “continuous improvement of safety and prevention” by offering the human and instrumental resources needed to raise the awareness of workers and train them concerning company risks, to enable them to perform their duties in a safe way and aware of their responsibilities with regards to health and safety matters in their workplace.
Guarantee all employees a healthy and safe workplace, encouraging them to work in accordance with the current legislation and regulations, and encouraging them to participate actively in the activities concerning the management of health and safety at work. Duly for the activities carried out, concretize the commitment to comply with the legislation by observing the provisions of the DVR (Risk Assessment Document).
Pursue a continual improvement of the technical features of the designed and manufactured products (gate valves, check valves and strainers), to improve and consolidate the company’s image.
Promote responsible management of the product or service throughout its entire life cycle, in for improving its performance and reduce its impact on the environment, also by informing customers on how to use and manage the "end of life".
Seek the optimization of the company processes for obtaining the highest level of efficiency and effectiveness, in order to achieve the economic development of the company together with equity and social progress, complying with international directives such as the Directive concerning pressure equipment 2014/68/EU (PED).
Develop and spread the culture of Quality, of respect for the environment and of safety at work, not only with regards to internal staff, but also directly involving suppliers to commit to the requirements they subscribe to with our company, as well as relevant stakeholders.

Maran e Peracini products satisfy the requirements of the PED (Pressure Equipment Directive) 2014/68/EU Annex III Module H.

Cast Iron Valves Production

Since 1993 the manufacturing process in our plant has been monitored by an integrated and constantly updated hardware/software system.

An internal network of industrial terminals connected to the manufacturing machines allows the supervision of all the production stages and gathers real-time data.

This system allows not only production supervision but also quality control.

Every stage of the checking process, including size measurements, is recorded centrally.

We are therefore able to guarantee the traceability of every manufactured valve, starting from the production batch.

The documentation of every supplied product includes:

- chemical analysis and mechanical properties of the materials (with EN 10204-3.1 certification)

- inspections of all components upon receipt;

- results of the process quality control;

- final hydraulic test according to EN 12266-1.

 

After the assembly stage every valve undergoes the hydraulic leakage test (EN 12266-1), followed by a coating stage, which can be customized.

Maran e Peracini S.r.l.

Via Valduggia, 25

13011 Borgosesia (VC) Italia

P.I. e C.F. : IT00165020025

REA : VC - 82897

Maran e Peracini S.r.l.

Contacts

Tel. : +39 016326757

MadeInItaly

Privacy Policy

Copyright 2018-2022 Maran e Peracini S.r.l. © All Rights Reserved - Credits